ADDTRON TECHNOLOGY CO., LTD. ET-10T1B Device Type Transceiver NIC Type Ethernet Maximum Onboard Memory Unidentified Boot ROM Not available Network Transfer Rate 10Mbps Topology Star Wiring Type Unshielded twisted pair Data Bus External [Image] CONNECTIONS Function Label Function Label AUI transceiver via CN1 RJ-45 UTP connector CN2 DB-15 USER CONFIGURABLE SETTINGS Function Label Position » SQE test function enabled SW1/1 On SQE test function disabled SW1/1 Off » Link beat enabled SW1/2 On Link beat disabled SW1/2 Off Note: Disable link beat in networks incompatible with 10BaseT standard DIAGNOSTIC LED(S) LED Color Status Condition PWR Unidentified On Power is on PWR Unidentified Off Power is off RX Unidentified Blinking Data is being received RX Unidentified On Heavy LAN traffic load RX Unidentified Off Data is not being received TX Unidentified Blinking Data is being transmitted TX Unidentified On Large data is being transmitted TX Unidentified Off Data is not being transmitted LNK Unidentified On Network connection is good LNK Unidentified Off Network connection is broken COL Unidentified Blinking Collision detected on network COL Unidentified Off Collision not detected on network COL Unidentified On Possible error occurred